The keypad must be mounted in sight of the door(s), at least 5 feet above the ground, and clear of any moving door parts. Garage Door Opener Keypad Mounting Instructions After a few seconds, the LED will turn off. Rapid blinking of the red LED indicates an error. Any keypad button will control the door for 30 seconds after the door starts moving. After the LED stops blinking, re-enter your PIN ad try again. If the LED is blinking rapidly, the PIN was entered incorrectly. NOTE: If the door does not move, check the LED on the keypad. ![]() The LED indicators will automatically turn off. Select the first opener and press and hold the PROGRAM/SET button until both LED lights turn BLUE.Press the number of doors you wish to control (2 or 3).Enter your PIN and press the PROGRAM button.Create Your Wireless Keypad PIN (Personal Identification Number)Īll garage door openers will use the same PIN.Program Keypad for Multiple Garage Door (CodeDodger 2) ![]() The keypad backlight will turn off in approximately 30 seconds.(It will automatically stop at the fully open or fully closed position.) Enter your PIN using the keys on the keypad. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |